Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Frame Edge Seal

Model: Volkswagen Maggiolino MK 1 - Years: 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949
Part: Body

See other generations:
Video tutorial

Before securing the seal along the perimeter of the frame, you need to shape the four strips that will be applied to the 4 sides. It is recommended to prepare one strip at a time by positioning the seal along the side to be covered, marking with a marker the points where holes will be made (the smaller ones for the application of the securing rivets and the larger ones for the passage of the securing studs of the body) and determining the correct length by cutting the mating edge at 45°. At this point, create the smaller holes with a punch plier and the larger ones with a drilling punch.

Carefully clean the edge of the bodywork and the back of the seal, apply the adhesive and then secure the seal by correctly aligning the holes; subsequently, apply the rivets for fastening.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

How to Fit the Bumper on an Old Model Volkswagen Beetle
How to Fit the Bumper on an Old Model Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) How to fit the bumper/metal beam on an old model Volkswagen Beetle? Follow these steps: place the seal in the gaps on the car's bodywork, then insert…
Replacing Floor Parts or Undercarriage
Volkswagen Maggiolino (1938-1980 / MK 1) Move the front seats forward to maximise space in the rear; detach the rear seat base and remove it from the cabin; remove all coverings until you ac…
Replacing the Door Sill Trim
Volkswagen Maggiolino (1938-1980 / MK 1) To facilitate the removal of the metal parts to be replaced, first remove the doors: remove the circlip from the hinge pin, then extract the pin and …

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos