Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Maggiolino
    4. : How to mount the bumper on a Volkswagen Beetle

Volkswagen Maggiolino - Video tutorial

Model: Volkswagen Maggiolino MK 1 - Years 1938-1980
Part: Windshield
Operation: How to mount the bumper on a Volkswagen Beetle

How to mount the metal bumper / cross member on an old model Volkswagen Beetle? Let's see how to proceed: we lay the gasket in the slots placed on the car body, then, we insert the bars (metal) of the bumper in the sheet. We screw the locking pins into the threads of the frame with a socket wrench (we tighten the pins well). We carry out the same assembly operation of the rear crossbar / bumper (we also tighten the pins with the socket wrench in the car frame). We carefully check the exact assembly of the previously assembled pieces (we use steel pins to avoid rust.


Posted on 26 October 2023 by ScegliAuto

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos