Do it yourself
| ||||
|
Volkswagen Maggiolino - Video tutorial
Model: Volkswagen Maggiolino
MK 1
- Years 1938-1980 To facilitate the removal of the sheet metal parts to be replaced, first remove the doors: remove the seeger ring from the hinge fixing pin, then extract the pin and remove the door. With a drill, drill the welding points that secure the sill panels to be replaced. With wooden wedges create a sort of support / scaffold to lift the body from the floor, just enough to be able to extract the fascia. Restore the part of the sheet metal housing the door hinge and finally apply the new fascia by welding it to the floor.
Posted on 9 July 2023 by ScegliAuto
This video is currently unavailable
Other guides that may interest you |
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |