Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the side glass seal of the Volkswagen Beetle

Model: Volkswagen Maggiolino MK 1 - Years 1938-1980

Today's video will show us the process of disassembling and replacing the side window seal of the Volkswagen Beetle. First, we open the front door of the car and start gently removing the window seal, using perhaps some thin plastic levers; then we proceed to thoroughly clean the area affected by dirt and possible rust, as shown in the video. At this point, we install the new side window seal, fixing it correctly; we then verify that the window goes up and down perfectly!

Posted on 8 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the side glass and seal on the Volkswagen Beetle
Replacing the side glass and seal on the Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) In this guide, we will look at the instructions that will allow us to remove and replace the side glass and its seal on the Volkswagen Beetle. First,…
How to Fit the Window Seal on a Volkswagen Beetle
How to Fit the Window Seal on a Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) How to fit the window seal on a Volkswagen Beetle? Don't worry, follow this guide to proceed. Start the installation: take the rubber seal and use a …
How to Replace the Window Regulator Mechanism on the Volkswagen Beetle
How to Replace the Window Regulator Mechanism on the Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) In this brief guide, you will learn the main instructions on how to dismantle and replace the window regulator mechanism on the Volkswagen Beetle. Fi…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos