Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Switch on a Volkswagen Super Beetle?

Model: Volkswagen Maggiolino MK 1 - Years: 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the ignition switch on the Volkswagen Super Beetle, first remove the steering wheel by loosening its corresponding fixing screws and the nut of the central pin. Once the steering wheel is removed, loosen the underlying screws and disconnect the connector from the bottom to remove the indicator stalk.

At this point, insert a screwdriver into the hole of the ignition switch housing to release a pin. Once this pin is released, the switch can be pulled out and replaced with a new spare part.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Ignition Switch on a Volkswagen Beetle
How to Replace the Ignition Switch on a Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) Before starting, sit in the driver's seat of your Volkswagen Beetle. Begin by disengaging the horn and disconnecting the relevant electrical connecto…
How to Replace the Ignition Switch on a Volkswagen Beetle
How to Replace the Ignition Switch on a Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) Before starting, sit in the driver's seat of your Volkswagen Beetle. Begin by unclipping the horn and disconnecting its electrical connector. Next, r…
Valve Timing Adjustment for Volkswagen Beetle 1200
Valve Timing Adjustment for Volkswagen Beetle 1200
Volkswagen Maggiolino (1938-1980 / MK 1) In this video tutorial, learn how to adjust the valve timing of a Volkswagen Beetle 1200. This operation should be performed every 10,000 miles. Firs…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos