Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Window Seal on a Volkswagen Beetle

Model: Volkswagen Maggiolino MK 1 - Years 1938-1980
Part: Car door

How to fit the window seal on a Volkswagen Beetle? Don't worry, follow this guide to proceed. Start the installation: take the rubber seal and use a lever to follow the perimeter of the window, pressing as you move along the door track. Press the seal into the door to ensure it adheres properly. Finally, check by running your hand along the seal, pressing and smoothing out any areas not properly seated in the window. Test the correct operation of the manual window winder (check if it moves smoothly).

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fit the Bumper/Beam on a Volkswagen Beetle
How to Fit the Bumper/Beam on a Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) Here's how to fit the bumper/metal beam (after having it chromed) on a Volkswagen Beetle: place the seal in the gaps on the car's bodywork, then inse…
How to Adjust the Points on a Volkswagen Beetle?
How to Adjust the Points on a Volkswagen Beetle?
Volkswagen Maggiolino (1938-1980 / MK 1) To adjust the points on a Volkswagen Beetle, first remove the distributor so that it can be extracted from its housing. Once the distributor is remov…
How to Remove the Front Bumper of a Volkswagen Beetle?
How to Remove the Front Bumper of a Volkswagen Beetle?
Volkswagen Maggiolino (1938-1980 / MK 1) To remove the front bumper of a Volkswagen Beetle, open the bonnet to access the screws that secure the bumper from the inside: these screws hold the…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos