Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Maggiolino
    4. : Steering wheel

Volkswagen Maggiolino - Steering wheel

Steering Wheel Volkswagen Maggiolino (1938-1980 / mk 1)

Volkswagen Maggiolino (1938-1980 / MK 1)
How to remove the steering wheel of a Volkswagen Beetle?
To remove the steering wheel of a Volkswagen Beetle, start by disconnecting the negative terminal of the battery to avoid short circuits, as the steering wheel …Read all…
Posted on 26 October 2024 by ScegliAuto
Volkswagen Maggiolino (1938-1980 / MK 1)
How to remove the steering wheel of a Volkswagen Beetle?
To disassemble the steering wheel of a Volkswagen Beetle, start by unhooking and removing the horn button, which is usually located in the center of the …Read all…
Posted on 2 May 2024 by ScegliAuto
Volkswagen Maggiolino (1938-1980 / MK 1)
Replacing the Steering Wheel on a Volkswagen Beetle
Replace the steering wheel on your Volkswagen Beetle. Follow this video for the disassembly process. First, loosen the large bolt located at the centre of the …Read all…
Posted on 13 March 2026 by ScegliAuto
Alternator (2) Transmission (1) Spark plugs (4) Carburetor (1) Body (4) Key (2) V-belt (1) Onboard computer (1) Checks and maintenance (7) Shifter boot (1) Bearing (2) Headlight (3) Fuel filter (1) Parking brake (1) Clutch (1) Window switch (1) Accessory kit (2) Headlight bulb (1) Engine (7) Engine oil (3) Clock (1) Door trim panel (1) Windshield (2) Front bumper (2) Rear bumper (1) Fuel pump (1) Car door (1) Radiator (1) Seat (1) Axle shaft (3) Suspension system (1) Valve (2) Side window (2) Steering wheel (3)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos