Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Engine Oil on a VW Beetle

Model: Volkswagen Maggiolino MK 1 - Years: 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949
Part: Engine oil

See other generations:
Video tutorial

Do you want to replace the oil on a Volkswagen Beetle? Follow these steps: lift the bonnet and secure it, then remove the filler cap. Raise the car on a column lift; unscrew the oil sump plugs and allow the fluid to drain into a disposal container. Using a screwdriver, remove the oil filter located inside (as shown in the video), take it out of the engine bay, and fit the new part.

Finally, top up with the new fluid, using the metal dipstick to measure the oil level multiple times until you reach the ideal measurement.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

How to Replace the Ignition Switch on a Volkswagen Beetle
How to Replace the Ignition Switch on a Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) Before starting, sit in the driver's seat of your Volkswagen Beetle. Begin by unclipping the horn and disconnecting its electrical connector. Next, r…
Replacing the side glass and seal on the Volkswagen Beetle
Replacing the side glass and seal on the Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) In this guide, we will look at the instructions that will allow us to remove and replace the side glass and its seal on the Volkswagen Beetle. First,…
How to Install the Alternator on a Volkswagen Beetle
How to Install the Alternator on a Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) To install the alternator on a Volkswagen Beetle, open the boot to access the components inside. Remove the carburettor to gain access to the generat…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos