|
Do it yourself
| |||
| ||||
Location of the Oil Filter on the Volkswagen Crafter
Model: Volkswagen Crafter
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
In this video, see where the oil filter is located on the 2017 Volkswagen Crafter: it is positioned behind the air filter, so to access it, you need to open the air filter box. The oil filter is located directly behind it. To remove it, you will need a 32 mm socket wrench. This information is valuable because on many vehicles, the filter is hidden and not immediately visible. On some versions, however, it is located near the oil sump and can be accessed from underneath the vehicle. It may also be covered by a plastic shield. The oil filter should be replaced every 10,000 miles or with every engine oil change.
Posted on 11 October 2026 by ScegliAuto
Related tutorials
Volkswagen Crafter
(2006-2017 /
2F, MK 1, 2E)
To replace the oil filter on a Volkswagen Crafter, open the bonnet to access the components inside the engine bay: here you will find the screws secu…
Volkswagen Crafter
(2017-2026 /
MK 2, SY, SZ)
Today's instructions will allow us to perform the reset procedure for the service light for the regular maintenance of the engine oil change on the V…
Volkswagen Crafter
(2017-2026 /
MK 2, SY, SZ)
In this tutorial, you will see how to replace the cabin filter in a Volkswagen Crafter van, a very simple and quick operation. First, sit in the pass…
Other guides you may be interested in
|
Location of the Jack and Spare Wheel of the Toyota Yaris
In the unfortunate event that one of the wheels of the Toyota Yaris is punctured, it is useful to know the location of the lifting jack, the spare wheel, the tool to operate the jack, and to unscrew the wheel bolts. The jack is located under the driver's seat, secured to a bracket and protected by a plastic cover, which you can remove by acting on the fixing clips. The spare wheel is located under the floor panel of the boot, secured to the floor by a threaded plastic flange, alongside which you will find the tool, consisting of a bent bar, which is used to operate the jack on one side and to remove the wheel on the other. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.375
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
