Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Volkswagen Crafter

Model: Volkswagen Crafter 2F, MK 1, 2E - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Engine oil

See other generations:
This video is currently unavailable

Before you can start, open the bonnet of your Volkswagen Crafter. Begin by unscrewing and removing the oil filler cap. Next, lift the front of your vehicle.

This will give you access to the lower cover of the oil sump. Proceed to remove the lower cover by unscrewing the relevant fixing bolts.

At this point, unscrew the lower oil drain nut. Once all the engine oil has drained out, re-screw the drain nut, then lower the front of the vehicle. When you complete this step, you can add new oil through the upper hole, then re-screw the filler cap, and the replacement will be complete.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Where to Find and How to Access the Fuse Box on a Volkswagen Crafter?
Where to Find and How to Access the Fuse Box on a Volkswagen Crafter?
Volkswagen Crafter (2017-2026 / MK 2, SZ, SY) Hello, today’s task is to discover where to find and how to access the fuse box on your Volkswagen Crafter. Start by opening the front engine bonnet.…
How to Reset the "Service" Light on a Volkswagen Crafter?
How to Reset the "Service" Light on a Volkswagen Crafter?
Volkswagen Crafter (2006-2017 / 2F, MK 1, 2E) Hello, today discover how to reset the "Service" light on your Volkswagen Crafter. Start by sitting in the driver's seat of the van. Then, press and …
Where is the OBD2 port of the Volkswagen Crafter 2 located?
Where is the OBD2 port of the Volkswagen Crafter 2 located?
Volkswagen Crafter (2017-2026 / MK 2, SZ, SY) If you own a second series Volkswagen Crafter and want to find out where the OBD2 port is located, you just need to carefully follow the following st…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos