Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Engine from a Volkswagen Beetle

Model: Volkswagen Maggiolino MK 1 - Years 1938-1980
Part: Engine

This guide will show you the steps to disassemble and remove the engine from the bodywork of a Volkswagen Beetle, commonly known as the Bug. First, open the rear engine cover and immediately start by removing and disconnecting the various electrical wiring of the ignition coil and alternator; then remove the fuel lines and disconnect the air filter. Now also remove the belt and start disconnecting the exhaust system; lift the vehicle to also detach the transmission. Use a jack to remove the engine, following the video until the end!

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb on a Volkswagen Beetle
Replacing the Front Headlight Bulb on a Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) In this video tutorial, you will learn how to remove the front headlight and optionally replace the bulb of a Volkswagen Beetle (old-style). First, r…
Guide to Timing the Engine of the Volkswagen Beetle
Guide to Timing the Engine of the Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) Here are the main instructions on how to time the engine and distribution of the Volkswagen Beetle. To correctly time the engine, you need a special …
How to replace the side glass seal of the Volkswagen Beetle
How to replace the side glass seal of the Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) Today's video will show us the process of disassembling and replacing the side window seal of the Volkswagen Beetle. First, we open the front door of…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos