Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement

Model: Volkswagen Maggiolino MK 1 - Years: 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949
Part: Engine oil

See other generations:
Video tutorial

The drain plug is located at the centre of the oil sump: position a suitable container and unscrew the nuts around the perimeter of the plug to allow the used oil to drain out; remove the gasket without damaging it and take out the flange housing the mesh filter with its gasket.

Also replace the oil filter located near the left rear wheel, filling it with oil before installation.

Thoroughly clean the mesh filter and reassemble it applying the relevant gaskets. Finally, fill the engine with new oil according to the SAE specifications and the quantities stated in the user and maintenance manual.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Removing Engine Oil on a VW Beetle
Removing Engine Oil on a VW Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) Do you want to replace the oil on a Volkswagen Beetle? Follow these steps: lift the bonnet and secure it, then remove the filler cap. Raise the car o…
Installing the Rear Bumper on a Volkswagen Beetle
Installing the Rear Bumper on a Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) In this video, you will learn how to install the rear bumper on a Volkswagen Beetle, commonly known as the Bug. First, ensure you have all components…
Replacing the Door Sill Trim
Volkswagen Maggiolino (1938-1980 / MK 1) To facilitate the removal of the metal parts to be replaced, first remove the doors: remove the circlip from the hinge pin, then extract the pin and …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos