Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Sharan
    4. : Car stereo

Volkswagen Sharan - Car stereo

Car Stereo Volkswagen Sharan (2010-2023 / 7 n, mk 2)

Volkswagen Sharan (2010-2023 / 7N, MK 2)
How to Replace the Radio in a Volkswagen Sharan?
To replace the radio in a Volkswagen Sharan, use a tool to lever off the trim surrounding the climate control buttons located below the radio. Once this trim …Read all…
Posted on 30 August 2026 by ScegliAuto
Volkswagen Sharan (2010-2023 / 7N, MK 2)
How to Replace the Radio in the Volkswagen Sharan
This guide provides the main instructions for removing and replacing the standard radio in the Volkswagen Sharan, in simple and quick steps. First, get inside …Read all…
Posted on 12 July 2026 by ScegliAuto
Shocks (1) Air conditioning (1) Car stereo (2) Battery (2) Control arm (1) Convertible top (1) Body (1) Key (1) Trunk lock (1) Timing belt (3) Air conditioner (2) Checks and maintenance (10) Headlight (3) Air filter (5) Cabin air filter (6) Fuel filter (1) Diesel fuel filter (3) Parking brake (1) Grille (1) Light bulb (1) Headlight bulb (3) Tail light bulb (3) License plate light (2) Engine (1) Starter motor (1) Engine oil (3) Clock (4) Door trim panel (8) Windshield (1) Rear bumper (1) Brake pads (1) Car door (2) Push button (1) Wheel (2) Fuse box (26) Seat (5) Side mirror (1) AdBlue warning light (12) Warning light – error code (4) Tire pressure warning light (8) Service warning light (45) Windshield wipers (1) Drivetrain (2)

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos