Do it yourself
Frequently asked questions about cars and motorcycles

Volkswagen Sharan - Seat

Volkswagen Sharan (2010-2023 / MK 2, 7N)
How do you remove the front seat of the Volkswagen Sharan?

In order to remove the front seat of the Volkswagen Sharan, you need to loosen the screws that secure the seat to its housing: these can be found on the …read all…
Posted on 6 January 2024 by ScegliAuto
Volkswagen Sharan (2010-2023 / MK 2, 7N)
How to lower or configure the rear seats of the Volkswagen Sharan.

We will briefly see the instructions that will allow us to lower and configure the rear seats of the Volkswagen Sharan. First, we open the rear door of the …read all…
Posted on 7 August 2023 by ScegliAuto
Volkswagen Sharan (1995-2010 / MK 1, 7M)
How to remove the Volkswagen Sharan front seat

Let's see how to remove the seat of a Volkswagen Sharan. We move the seat up, unscrew the tightening screws placed on the rear rail with a socket wrench. We …read all…
Posted on 17 January 2024 by ScegliAuto
Volkswagen Sharan (1995-2010 / MK 1, 7M)
Covered disassemble the seat of a Vw Sharan

Removing the rear seat of a Volkswagen Sharan? We lower the seat back, move the seat forward, let it rest on the seat of the seat itself. We pull the metal …read all…
Posted on 17 December 2023 by ScegliAuto

Shock absorbers (1) Air conditioning (1) Car stereo (2) Battery (1) Arm (1) Soft top (1) Key (1) Locking the trunk (1) Timing belt (2) -board computer (2) Checks and maintenance (27) Headlight (3) Air filter (5) Cabin air filter (5) Petrol filter (1) Diesel filter (2) Hand brake (1) Grille (1) Light bulb (1) Headlight bulb (2) Rear light bulb (2) License plate light (1) Engine (1) Starter motor (1) Engine oil (4) Door panel (7) Windshield (1) Rear bumper (1) Brake pads (1) Tires (2) Door (1) Push button (1) Instrument cluster (3) Wheel (2) Fuse box (12) Seat (4) Outside rearview mirror (1) Windscreen wipers (1) Transmission (2)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos