Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Sharan
    4. : Headlight

Volkswagen Sharan - Headlight

Volkswagen Sharan (1995-2010 / MK 1, 7M)
How to remove the headlight of the Volkswagen Sharan - Seat Alhambra
In this video tutorial we will see how to remove and replace the headlight of the Volkswagen Sharan, but also of the Seat Alhambra. First we open the bonnet …read all…
Posted on 6 April 2024 by ScegliAuto
Volkswagen Sharan (1995-2010 / MK 1, 7M)
Headlight adjustment motor replacement
In order to replace the motor that adjusts the height of the headlights as the load conditions of the car vary, it is necessary to remove the headlight itself; …read all…
Posted on 28 August 2023 by ScegliAuto
Volkswagen Sharan (1995-2010 / MK 1, 7M)
Front headlight disassembly instructions
In order to disassemble the front light, it is necessary to start by removing the plastic cover of the bonnet grille by unscrewing the relative fixing screws; …read all…
Posted on 9 August 2023 by ScegliAuto
Shock absorbers (1) Air conditioning (1) Car stereo (2) Battery (1) Arm (1) Soft top (1) Key (1) Locking the trunk (1) Timing belt (2) -board computer (2) Checks and maintenance (27) Headlight (3) Air filter (5) Cabin air filter (5) Petrol filter (1) Diesel filter (2) Hand brake (1) Grille (1) Light bulb (1) Headlight bulb (2) Rear light bulb (2) License plate light (1) Engine (1) Starter motor (1) Engine oil (4) Door panel (7) Windshield (1) Rear bumper (1) Brake pads (1) Tires (2) Door (1) Push button (1) Instrument cluster (3) Wheel (2) Fuse box (12) Seat (4) Outside rearview mirror (1) Windscreen wipers (1) Transmission (2)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos