Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Dismantling the Front Headlamp

Model: Volkswagen Sharan 7M, MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Headlight

See other generations:
Video tutorial

To dismantle the front headlamp, start by removing the plastic cover of the grille by unscrewing the relevant fixing screws; then detach the trim by pulling it forward and lifting the lower part that is attached to the bumper via plastic tabs (specific extraction tools are available on the market); next, unscrew all the fixing bolts of the headlamp, removing the reinforcement rib that connects the wing to the trim; disconnect the power connector and pull the headlamp forward, first sliding out the side near the trim and then the side near the wing.

Proceed in reverse for installation.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

How to Remove Bulbs from the Sharan Rear Light
How to Remove Bulbs from the Sharan Rear Light
Volkswagen Sharan (1995-2010 / 7M, MK 1) Are the bulbs in your rear light blown? Let’s look at removing the bulbs from the Sharan light. Lift the tailgate of the boot and use a screwdriver t…
How to Replace the Front Headlamp Bulbs of a Volkswagen Sharan
How to Replace the Front Headlamp Bulbs of a Volkswagen Sharan
Volkswagen Sharan (1995-2010 / 7M, MK 1) See how to replace the front headlamp bulbs of a Volkswagen Sharan. Open the front bonnet by pulling the lever located at the bottom right of the das…
How to Remove the Front Headlight of the Volkswagen Sharan - Seat Alhambra
How to Remove the Front Headlight of the Volkswagen Sharan - Seat Alhambra
Volkswagen Sharan (1995-2010 / 7M, MK 1) In this video tutorial, you will learn how to remove and replace the front headlight of the Volkswagen Sharan, as well as the Seat Alhambra. First, o…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos