Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Bulbs from the Sharan Rear Light

Model: Volkswagen Sharan MK 1, 7M - Years 1995-2010
Part: Tail light bulb

Are the bulbs in your rear light blown? Let’s look at removing the bulbs from the Sharan light. Lift the tailgate of the boot and use a screwdriver to remove the cover cap at the back of the light: prepare to detach the plastic inspection cap. Disconnect the bulb holders from the light, replace the damaged bulbs with new ones (ensure voltage and size match the original). After replacing the bulbs, secure the bulb holder back into the light. Cover the light with the plastic cover. Test the operation of the new bulbs in the lights.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlight of the Volkswagen Sharan - Seat Alhambra
How to Remove the Front Headlight of the Volkswagen Sharan - Seat Alhambra
Volkswagen Sharan (1995-2010 / MK 1, 7M) In this video tutorial, you will learn how to remove and replace the front headlight of the Volkswagen Sharan, as well as the Seat Alhambra. First, o…
How to Remove the Rear Light on a Volkswagen Sharan
How to Remove the Rear Light on a Volkswagen Sharan
Volkswagen Sharan (1995-2010 / MK 1, 7M) Removing the rear light on a Volkswagen Sharan is really quite easy. First, open the tailgate. Although not shown in the video, it is advisable for y…
How to Replace the Front Headlamp Bulbs of a Volkswagen Sharan
How to Replace the Front Headlamp Bulbs of a Volkswagen Sharan
Volkswagen Sharan (1995-2010 / MK 1, 7M) See how to replace the front headlamp bulbs of a Volkswagen Sharan. Open the front bonnet by pulling the lever located at the bottom right of the das…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos