Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the VW Sharan

Model: Volkswagen Sharan MK 1, 7M - Years 1995-2010
Part: Headlight bulb

The steps to replace the rear headlight bulb of a Volkswagen Sharan model m7 are simple and quick to do independently. The first step is to open the trunk of the vehicle. The second step is to remove the plastic side cover of the trunk. The third step is to disconnect the connector from the headlight and remove the interior light so you can proceed with replacing the bulbs. The fourth step is to insert the interior light, connect the connector, and close the plastic cover of the trunk.

Posted on 11 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear headlight bulb of the Volkswagen Sharan?
How do you replace the rear headlight bulb of the Volkswagen Sharan?
Volkswagen Sharan (1995-2010 / MK 1, 7M) In order to replace the rear headlight bulb of the Volkswagen Sharan, you need to open the hood so that you can locate the panel on the side of the t…
How to Remove the Rear Light on a Volkswagen Sharan
How to Remove the Rear Light on a Volkswagen Sharan
Volkswagen Sharan (1995-2010 / MK 1, 7M) Removing the rear light on a Volkswagen Sharan is really quite easy. First, open the tailgate. Although not shown in the video, it is advisable for y…
How to Remove Bulbs from the Sharan Rear Light
How to Remove Bulbs from the Sharan Rear Light
Volkswagen Sharan (1995-2010 / MK 1, 7M) Are the bulbs in your rear light blown? Let’s look at removing the bulbs from the Sharan light. Lift the tailgate of the boot and use a screwdriver t…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos