Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Light Bulb on a Volkswagen Sharan?

Model: Volkswagen Sharan MK 1, 7M - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear light bulb on a Volkswagen Sharan, open the bonnet to access the panel on the side of the boot corresponding to the bulb to be replaced. Once this panel is removed, you can locate the bulb holder.

This can be pulled out, and the bulb can now be replaced with a new spare part. Refit the bulb holder back into its housing, insert the side panel of the boot, and check that everything is functioning correctly.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

Volkswagen Sharan (1995-2010 / MK 1, 7M) Are the bulbs in your rear light blown? Let’s look at removing the bulbs from the Sharan light. Lift the tailgate of the boot and use a screwdriver t…
Volkswagen Sharan (1995-2010 / MK 1, 7M) The steps to replace the rear light bulb on a Volkswagen Sharan model M7 are simple and quick. First, open the vehicle's boot. Second, remove the pla…
Volkswagen Sharan (1995-2010 / MK 1, 7M) See how to replace the front headlamp bulbs of a Volkswagen Sharan. Open the front bonnet by pulling the lever located at the bottom right of the das…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Headlight Bulb on a Mercedes A-Class W169?

If one or more bulbs in the front headlights of your Mercedes A-Class W169 (2004-2012) are not functioning correctly, you need to replace them. This is a very simple task that takes just a few minutes. First, park the car safely and turn it off completely. Next, go to the front and lift the hood. Remove the protective cover located inside the engine compartment and take out the faulty bulb. Finally, insert the new replacement bulb and properly reattach the protective cover. Close the hood, and you're done.

Watch the video!


by ScegliAuto

More videos