Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Sharan
    4. : Drivetrain

Volkswagen Sharan - Drivetrain

Drivetrain Volkswagen Sharan (1995-2010 / 7 m, mk 1)

Volkswagen Sharan (1995-2010 / 7M, MK 1)
Replacement of Automatic Gearbox Solenoid Valve
If you experience problems with the automatic gearbox, first perform a diagnostic check to assess the type of fault recorded. Specifically, the diagnosis …Read all…
Posted on 22 February 2026 by ScegliAuto
Volkswagen Sharan (1995-2010 / 7M, MK 1)
Differential Oil Replacement Instructions
Lift the vehicle on a hydraulic ramp, place a suitable container directly under the differential drain plug, and unscrew it to allow the oil to drain out: it …Read all…
Posted on 21 February 2026 by ScegliAuto
Shocks (1) Air conditioning (1) Car stereo (2) Battery (2) Control arm (1) Convertible top (1) Body (1) Key (1) Trunk lock (1) Timing belt (3) Air conditioner (2) Checks and maintenance (10) Headlight (3) Air filter (5) Cabin air filter (6) Fuel filter (1) Diesel fuel filter (3) Parking brake (1) Grille (1) Light bulb (1) Headlight bulb (3) Tail light bulb (3) License plate light (2) Engine (1) Starter motor (1) Engine oil (3) Clock (4) Door trim panel (8) Windshield (1) Rear bumper (1) Brake pads (1) Car door (2) Push button (1) Wheel (2) Fuse box (26) Seat (5) Side mirror (1) AdBlue warning light (12) Warning light – error code (4) Tire pressure warning light (8) Service warning light (45) Windshield wipers (1) Drivetrain (2)

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos