Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in the Volkswagen Sharan

Model: Volkswagen Sharan 7N, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Car stereo

See other generations:
Video tutorial

This guide provides the main instructions for removing and replacing the standard radio in the Volkswagen Sharan, in simple and quick steps. First, get inside the vehicle and start by removing the plastic cover over the climate control buttons; then unscrew the fixing screws to remove them and replace them with new ones, as shown in the video.

At this point, unscrew the radio screws to remove it, disconnecting the electrical connectors found at the back; finally, reassemble everything by applying the reverse procedure!


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in a Volkswagen Sharan?
How to Replace the Radio in a Volkswagen Sharan?
Volkswagen Sharan (2010-2023 / 7N, MK 2) To replace the radio in a Volkswagen Sharan, use a tool to lever off the trim surrounding the climate control buttons located below the radio. Once t…
How to Replace the Front Shock Absorber on a Volkswagen Sharan
How to Replace the Front Shock Absorber on a Volkswagen Sharan
Volkswagen Sharan (1995-2010 / 7M, MK 1) To replace the front shock absorber on a Volkswagen Sharan, lift the vehicle using a ramp or jack to access the bolts securing the corresponding whee…
Where is the fuse box located in the Volkswagen Sharan?
Where is the fuse box located in the Volkswagen Sharan?
Volkswagen Sharan (1995-2010 / 7M, MK 1) If you are looking for the fuse box located inside your first-generation Volkswagen Sharan, then this guide is all you need. All you have to do is ca…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos