Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Panel on a Volkswagen Polo

Model: Volkswagen Polo Polo 3, MK III, 6N, Polo III, MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Door trim panel

See other generations:
Video tutorial

Open the door in question and, using a plastic lever, lift the cover along the door handle. This way, you can unscrew the two screws located at the ends of the handle.

Now, also remove the cover of the window lift switch to unscrew the screw located inside its pivot. Unscrew any screws on the sides of the panel, and now you can extract the panel by pulling it towards you. Disconnect the connectors at the back of the panel to completely remove it.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Volkswagen Polo
How to Remove the Door Panel of a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before you start, open the door of your Volkswagen Polo. Begin by unfastening and removing the window switch panel from its housing in the door, then…
How to Remove the Door Panel on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Here are the instructions for removing and replacing the front door panel and speakers on a Volkswagen Polo. First, open the front door of your car a…
How to Remove the Door Panel of the Volkswagen Polo
How to Remove the Door Panel of the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In today's tutorial, you will learn how to remove and replace the front door panel of the Volkswagen Polo in simple and quick steps. First, open the …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos