Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor in a Volkswagen Golf?

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Starter motor

See other generations:
Video tutorial

In this tutorial, you will see how to replace the starter motor in a Volkswagen Golf, a very simple and quick operation. First, ensure that the key is not inserted for safety, then open the engine bay and, starting from the negative terminal, disconnect both battery terminals.

Next, remove the battery and its support plate, disconnect the positive power lead from the starter motor, and proceed to unclip the indicated plastic connector. At this point, you can unscrew the fixing bolts, separate the starter from the support, and fit the replacement.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

How to Remove the Starter Motor on a VW Golf 4
How to Remove the Starter Motor on a VW Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Learn how to remove the starter motor from a Volkswagen Golf 4. After removing the engine cover from the car, locate the starter motor. Disconnect th…
How to Replace the Starter Motor on a Volkswagen Golf?
How to Replace the Starter Motor on a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To replace the starter motor on a Volkswagen Golf, start by disconnecting the negative battery cable to avoid short circuits. Locate the starter moto…
Where is the Starter Motor Located in a Volkswagen Golf?
Where is the Starter Motor Located in a Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video, see where the starter motor is located in a Volkswagen Golf and how to proceed if you need to replace it. The starter motor is positio…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos