Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor on a VW Golf 4

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Starter motor

See other generations:
Video tutorial

Learn how to remove the starter motor from a Volkswagen Golf 4. After removing the engine cover from the car, locate the starter motor. Disconnect the power terminals of the starter motor using pliers or a screwdriver, depending on the pressure of the tabs.

Use a socket spanner to unscrew the securing bolts of the starter motor and remove it from the engine bay. Finally, fit the new starter motor by connecting the power cables and securing it with the associated screws. Prepare to refit the starter motor to the vehicle along with all its components.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

Replacing the Starter Motor Brushes on the Volkswagen Golf
Replacing the Starter Motor Brushes on the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This guide outlines the procedure for removing and replacing the starter motor brushes on the Volkswagen Golf. First, open the bonnet of your car and…
How to Replace the Starter Motor Brushes on the Volkswagen Golf
How to Replace the Starter Motor Brushes on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today, in this video tutorial, you will learn the procedure to remove and replace the starter motor brushes on the Volkswagen Golf. First, remove the…
How to Remove the Starter Motor from a Volkswagen Golf
How to Remove the Starter Motor from a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Before you begin, open the bonnet of your Volkswagen Golf. Start by disconnecting the two battery terminals, then remove the battery itself. Next, re…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos