Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor Brushes on the Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Starter motor

See other generations:
Video tutorial

This guide outlines the procedure for removing and replacing the starter motor brushes on the Volkswagen Golf. First, open the bonnet of your car and begin to remove the starter motor by disconnecting the serpentine belt and the electrical wiring; unscrew its mounting bolts to remove it. Next, unscrew the bolts on the starter motor to access the internal coil; remove the central nut to pull out the old brushes and replace them with new original Volkswagen brushes!


Updated on 19 June 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor Brushes on the Volkswagen Golf
How to Replace the Starter Motor Brushes on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today, in this video tutorial, you will learn the procedure to remove and replace the starter motor brushes on the Volkswagen Golf. First, remove the…
How do you replace the starter motor in the Volkswagen Golf 4?
How do you replace the starter motor in the Volkswagen Golf 4?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The starter motor of a car is the main component responsible for starting the engine, as it mainly depends on it. Over time, the brushes or the windi…
Replacing the Starter Motor
Replacing the Starter Motor
Volkswagen Golf (1991-1997 / MK 3, Golf III, Golf 3) The starter motor is located near the gearbox: before proceeding with disassembly, it is advisable to disconnect the battery to avoid short circuits.…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos