Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor Brushes on the Volkswagen Golf

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003

See other generations:
Video tutorial

Today, in this video tutorial, you will learn the procedure to remove and replace the starter motor brushes on the Volkswagen Golf. First, remove the starter motor from the engine by unscrewing the fixing screws and disconnecting the power electrical connectors; then unscrew the screws of the starter motor using a Torx screwdriver.

At this point, remove the copper coil and unscrew the internal screws to access the brushes; replace these and reassemble everything, following the video to the end!


Updated on 8 May 2026 by ScegliAuto


Related tutorials

Replacing the Starter Motor Brushes on the Volkswagen Golf
Replacing the Starter Motor Brushes on the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This guide outlines the procedure for removing and replacing the starter motor brushes on the Volkswagen Golf. First, open the bonnet of your car and…
How to Remove the Starter Motor on a VW Golf 4
How to Remove the Starter Motor on a VW Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Learn how to remove the starter motor from a Volkswagen Golf 4. After removing the engine cover from the car, locate the starter motor. Disconnect th…
How do you replace the starter motor in the Volkswagen Golf 4?
How do you replace the starter motor in the Volkswagen Golf 4?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The starter motor of a car is the main component responsible for starting the engine, as it mainly depends on it. Over time, the brushes or the windi…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos