Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor

Model: Volkswagen Golf MK 3, Golf III, Golf 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997
Part: Starter motor

See other generations:
Video tutorial

The starter motor is located near the gearbox: before proceeding with disassembly, it is advisable to disconnect the battery to avoid short circuits. Then disconnect the power cables from the starter and remove the securing bolts from the gearbox to remove it; once removed, protect the corresponding seat on the gearbox with a cloth.

Common faults often involve wear of the brushes and the relay, but mechanical failures of the pinion are also possible: therefore, it is advisable to opt for the installation of a refurbished starter motor, which is easy to find in the aftermarket at a good price.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

How to Remove the Starter Motor on a VW Golf 4
How to Remove the Starter Motor on a VW Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Learn how to remove the starter motor from a Volkswagen Golf 4. After removing the engine cover from the car, locate the starter motor. Disconnect th…
How to Replace the Starter Motor on a Volkswagen Golf
How to Replace the Starter Motor on a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Before starting, open the bonnet of your Volkswagen Golf. The starter motor is located at the lower right side of the engine block. Begin by removing…
How to Remove the Starter Motor from a Volkswagen Golf
How to Remove the Starter Motor from a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Before you begin, open the bonnet of your Volkswagen Golf. Start by disconnecting the two battery terminals, then remove the battery itself. Next, re…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos