Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp of the Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

Today's instructions will show you how to remove and replace the front headlamp of the Volkswagen Golf in simple steps. First, open the bonnet of the vehicle and start unscrewing the fixing screws located at the top of the headlamp; then unscrew the screws situated on the side of the wheel arch, gently detaching the bumper at the sides, as illustrated in the video.

At this point, disconnect the electrical connector of the bulbs and remove the headlamp unit, replacing it with the new one; if necessary, replace the bulbs and finally refit the front headlamp!


Updated on 23 October 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a 2015 Volkswagen Golf Mk7
How to Replace the Headlight Bulb on a 2015 Volkswagen Golf Mk7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) If you want to replace the headlight bulb on your 2015 Volkswagen Golf Mk7 yourself, follow this procedure to complete the operation quickly and safe…
Replacement of the Front Headlight on the Volkswagen Golf
Replacement of the Front Headlight on the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today's procedure will show you how to remove and replace the front headlight on the Volkswagen Golf, following the instructions below. First, open t…
How to Replace the Bulbs in the Front Headlight of a Volkswagen Golf Mk4
How to Replace the Bulbs in the Front Headlight of a Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) How do you replace the bulbs located in the front headlight of a Volkswagen Golf Mk4? Open the front bonnet by pulling the lever located at the botto…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos