Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the window lift button on the VW Golf

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Window switch

When the window lift on Volkswagen Golf GTI vehicles stops working, it means that the button needs to be replaced. To perform this operation, we must: -open the door that needs to be replaced; -insert a plastic lever into the button group; -remove the button; -disconnect the connector; -insert a new button into the button group; -connect the connector; -install the new keyboard inside the panel; After completing all the steps, we test the operation of the button by trying to open and close the passenger side window.

Posted on 20 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Window Regulator Motor on Volkswagen Golf MK3
Replacing Window Regulator Motor on Volkswagen Golf MK3
Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) This video shows the main steps to remove and replace the window regulator motor on a Volkswagen Golf Mk3. First, open the front door and remove the …
Removing the rear side window of the Volkswagen Golf
Removing the rear side window of the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today's guide will show you the main steps on how to remove and replace the rear side window of the Volkswagen Golf. First, open the rear door and be…
Replacement of the window regulator motor for the Volkswagen Golf
Replacement of the window regulator motor for the Volkswagen Golf
Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) Today's step-by-step instructions will show us how to disassemble and replace the window lift motor of the Volkswagen Golf. First, we open the front …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos