Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the window regulator motor for the Volkswagen Golf

Model: Volkswagen Golf MK 3, Golf III, Golf 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997
Part: Power window motor

See other generations:
Video tutorial

Today's step-by-step instructions will show us how to disassemble and replace the window lift motor of the Volkswagen Golf. First, we open the front door of the vehicle and begin to disassemble and remove the front door panel, unscrewing all the fastening screws; then we unscrew the screws of the window lift motor bracket and the side window, removing the window and the motor (also disconnecting the electrical connector), as shown in the video.

At this point, we carry out the repair or replacement of the components, finally reassembling the door panel!


Posted on 25 July 2025 by ScegliAuto


Related tutorials

Replacing the Window Regulator Motor and Mechanism on a Volkswagen Golf MK5
Replacing the Window Regulator Motor and Mechanism on a Volkswagen Golf MK5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video, see how to disassemble and replace the window regulator mechanism and motor on a fifth-generation Volkswagen Golf, as well as on other…
How to disassemble and replace the power window switch panel of the Volkswagen Golf
How to disassemble and replace the power window switch panel of the Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today we will see the instructions that will allow us to disassemble and replace the window switch panel of the Volkswagen Golf. First, we open the f…
How to Replace the Window Switches on a Volkswagen Golf
How to Replace the Window Switches on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today's instructions will illustrate the procedure for dismantling and replacing the window switches or switch panel on a Volkswagen Golf in simple s…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos