Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Wipers on a Volkswagen Golf 5

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Side window

In today's video, you will see how to reset the functionality of the window wiper switch on a Volkswagen Golf 5. This operation is useful when the battery is disconnected for repairs or replacement, causing the vehicle to lose its original configuration. Start by turning the key and switching on the instrument panel. Once done, raise the wipers fully and then lower them halfway; raise them again to the top position. They should now be configured correctly. Proceed in this manner and then test their operation.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wiper Motor of the Volkswagen Golf
How to Replace the Front Wiper Motor of the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today, we will see in this video tutorial how to dismantle and replace the front wiper motor of the Volkswagen Golf in simple and quick steps. First,…
Removing the Wiper Blade on a Golf 5
Removing the Wiper Blade on a Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Removing the damaged wiper blade from a Volkswagen Golf 5? Here’s how to do it. Lift the wiper arm: disconnect the blade from the metal arm. Fit a ne…
How to Remove the Wiper Blade on a Volkswagen Golf 7
How to Remove the Wiper Blade on a Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this video, see how to remove the wiper blade on a Volkswagen Golf 7. Grasp the front wiper blade with your hands, gently pull the movable blade (…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos