Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan motor of the Volkswagen Passat CC

Model: Volkswagen Passat Cc MK 1 - Years 2008-2018
Part: Blower motor

Below we will see the procedure for disassembling and replacing the blower motor of the Volkswagen Passat CC. First of all, we climb aboard the passenger compartment, and we begin to disassemble and remove the plastic side cover and the one found at the bottom, thus accessing the blower motor; then we unscrew the fixing screws of the blower and disconnect the power connector, as shown in the video. At this point, we carry out the repair or directly replace the blower motor, reassembling everything!

Posted on 31 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the radiator in the Volkswagen Passat CC?
How to replace the radiator in the Volkswagen Passat CC?
Volkswagen Passat Cc (2008-2018 / MK 1) In this tutorial, we can see how to replace the radiator in the Volkswagen Passat, a very simple operation. First of all, make sure that the engine i…
Replacement of the starter motor of the Volkswagen Passat CC 2.0 TSI
Replacement of the starter motor of the Volkswagen Passat CC 2.0 TSI
Volkswagen Passat Cc (2008-2018 / MK 1) The instructions provided in this guide will show us how to disassemble and replace the starter motor of the Volkswagen Passat CC 2.0 TSI. First, we …
How to replace the hood lock cable of the Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) The following steps will show us how to disassemble and replace the hood lock cable of the Volkswagen Passat CC. First, we open the front door of the…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos