Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the radiator in the Volkswagen Passat CC?

Model: Volkswagen Passat Cc MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Radiator

Video tutorial

In this tutorial, we can see how to replace the radiator in the Volkswagen Passat, a very simple operation. First of all, make sure that the engine is completely cold, then open the hood and remove the air filter box. Next, go under the vehicle, remove the protective cover and continue by removing the entire fan module.

At this point, all that is left to do is disconnect the lower hose, wait for all the liquid in the system to drain out, disconnect the upper hose, and remove the radiator. To install the replacement, simply follow the reverse procedure.


Posted on 5 September 2025 by ScegliAuto


Related tutorials

Replacement of the starter motor of the Volkswagen Passat CC 2.0 TSI
Replacement of the starter motor of the Volkswagen Passat CC 2.0 TSI
Volkswagen Passat Cc (2008-2018 / MK 1) The instructions provided in this guide will show us how to disassemble and replace the starter motor of the Volkswagen Passat CC 2.0 TSI. First, we …
How to Replace the Cabin Fan Motor in a Volkswagen Passat CC
How to Replace the Cabin Fan Motor in a Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) Below is the procedure for removing and replacing the cabin fan motor in a Volkswagen Passat CC. First, get inside the cabin on the passenger side an…
How do you program the key of the Volkswagen Passat CC?
How do you program the key of the Volkswagen Passat CC?
Volkswagen Passat Cc (2008-2018 / MK 1) It will be possible to program the key of the Volkswagen Passat CC by inserting the blank key into the ignition block: once the key has been inserted…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos