Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Seat of the Volkswagen FOX

Model: Volkswagen Fox MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Seat

See other generations:
Video tutorial

Today's step-by-step instructions will allow you to remove and replace the front seat of the Volkswagen FOX. First, open the front door and start unscrewing all the fastening screws located on the front seat rails, moving the seat forward and then backward to access them, using a Torx spanner with an extension; then disconnect the wiring located underneath the seat, as shown in the video.

At this point, remove the seat from the cabin, carrying out repairs or replacement; finally, refit everything!


Updated on 6 November 2026 by ScegliAuto


Related tutorials

Removing the Front Door Panel of the Volkswagen Fox
Removing the Front Door Panel of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) Today, we will go through the instructions for removing the front door panel of the Volkswagen Fox. First, open the front door of the vehicle and sta…
How to replace the front headlight of the Volkswagen Fox
How to replace the front headlight of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) Following these simple instructions, we will see how to disassemble and replace the front headlight of the Volkswagen Fox. First, open the hood of th…
Replacement of the front headlight bulb of the Volkswagen Fox
Replacement of the front headlight bulb of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) We see the instructions useful for disassembling and replacing the headlight bulb of the Volkswagen Fox. First, we open the hood of the car and start…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos