Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program the key of a Volkswagen or Audi

Model: Volkswagen Volkswagen Various
Part: Key

In this video we can see how to program the remote control of a Volkswagen or Audi car, having only one key available. We must insert the key into the ignition, turning it to position two; it is not necessary to start the engine. Make sure the doors are securely locked from the inside; now hold down the lock button until we see a red light flashing on the remote control. When it flashes, we can let it go and at this point our key will be programmed. Dealers in the USA charge between 150 and 250 dollars for this operation, so it is a significant saving.

Posted on 4 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key for Volkswagen?
How do you program the key for Volkswagen?
Volkswagen Volkswagen Various In order to program the key of a Volkswagen, you need to insert the blank key into the ignition lock: then you can connect a diagnostic tool to the O…
How to program the key of a Volkswagen vehicle
How to program the key of a Volkswagen vehicle
Volkswagen Volkswagen Various Programming the new key of a Volkswagen vehicle is a fully achievable operation independently, thanks also to our short video tutorial that will illu…
How to program a new remote control in a Volkswagen?
How to program a new remote control in a Volkswagen?
Volkswagen Volkswagen Various In this tutorial we can see how to program a new remote control in a Volkswagen, a very simple and quick operation. To do this, we will obviously nee…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos