Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Pump in the Volkswagen Golf?

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Pump

See other generations:
Video tutorial

To replace the windscreen washer pump in the Volkswagen Golf, loosen the screws that secure the front bumper to its housing, allowing access to the components located internally. The screws to be loosened are found at the top of the bumper and inside the front wheel arches.

Once the old bumper is removed, locate the washer fluid reservoir near the right wheel: the pump can be removed from its housing by disconnecting the fluid hoses and then inserting the new one.


Updated on 10 November 2026 by ScegliAuto


Related tutorials

How to Replace the Water Pump on a Volkswagen Golf 7?
How to Replace the Water Pump on a Volkswagen Golf 7?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To replace the water pump on a Volkswagen Golf 7, open the bonnet to access the engine compartment and locate the pump, which is at the front of the …
How to Remove the Fuel Pump from the Volkswagen Golf
How to Remove the Fuel Pump from the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this brief and simple guide, you will find instructions on how to remove and replace the fuel pump from the Volkswagen Golf. First, open the rear …
Removing the Fuel Pump from a Volkswagen Golf 4
Removing the Fuel Pump from a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video, you will see how to remove and replace the fuel pump of a fourth-generation Volkswagen Golf. First, remove the rear seat of your car, …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos