Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : Volkswagen Golf fuel pump disassembly 4

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf MK 4, Golf IV, Golf 4 - Years 1997-2003
Part: Fuel pump
Operation: Volkswagen Golf fuel pump disassembly 4

Let's see in this video how to remove and replace the fuel pump of a Volkswagen Golf fourth series. First of all, let's remove the rear seat of our car, since the pump is located just below; then we remove the fabric cover and unscrew the screws of the pump cover, using a Phillips screwdriver. At this point we are going to disconnect the electrical connector of the pump and also disconnect the two fuel pipes; we just have to unscrew the ring nut of the pump, beating with flat screwdrivers or using the appropriate tool. Once the pump has been removed, replace it with the new one!


Posted on 30 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Golf 2003-2008 - Why isn't the fuel pump in the Volkswagen Golf working anymore? Read Answer
    • Golf 2003-2008 - Where is the Volkswagen Golf 5 fuel pump fuse located? Read Answer
    • Golf 2003-2008 - What to check in case of fuel pump problems in the Volkswagen Golf Mk5? Read Answer
    • Golf 1997-2003 - Why is the diesel pump of a Volkswagen Golf giving problems? Read Answer
    • Golf 2012-2019 - What causes Volkswagen Golf 7 diesel pump problems? Read Answer
    • Golf 2003-2008 - Where is the diesel pump of a Volkswagen Golf located? Read Answer
    • Golf 2008-2012 - How to fix a fuel pump problem on a diesel Volkswagen Golf 5 1.9? Read Answer
    • Golf 2003-2008 - Where is the VW Golf 5 petrol pump located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos