Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : Volkswagen Golf 3 fuel pump replacement

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf 3, Golf III, MK 3 - Years 1991-1997
Part: Fuel pump
Operation: Volkswagen Golf 3 fuel pump replacement

In this video tutorial we will see how to remove the fuel pump of a Volkswagen Golf third series. First of all we open the tailgate of the trunk and we go to remove the upper covering; then we go to locate the fuel pump and remove the top cover. At this point we are going to disconnect the electric connector of the pump and unscrew the clamps of the fuel pipes, in order to remove them; now we unscrew the ring nut of the pump, with the appropriate tool or by beating with a screwdriver and hammer, and remove the fuel pump, as shown in the video!


Posted on 30 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Golf 2003-2008 - Why isn't the fuel pump in the Volkswagen Golf working anymore? Read Answer
    • Golf 2003-2008 - Where is the Volkswagen Golf 5 fuel pump fuse located? Read Answer
    • Golf 2003-2008 - What to check in case of fuel pump problems in the Volkswagen Golf Mk5? Read Answer
    • Golf 1997-2003 - Why is the diesel pump of a Volkswagen Golf giving problems? Read Answer
    • Golf 2012-2019 - What causes Volkswagen Golf 7 diesel pump problems? Read Answer
    • Golf 2003-2008 - Where is the diesel pump of a Volkswagen Golf located? Read Answer
    • Golf 2008-2012 - How to fix a fuel pump problem on a diesel Volkswagen Golf 5 1.9? Read Answer
    • Golf 2003-2008 - Where is the VW Golf 5 petrol pump located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos