Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Fuel Pump on a Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Fuel pump

See other generations:
This video is currently unavailable

Today's guide will show you how to dismantle and replace the fuel pump on a Volkswagen Golf in simple and quick steps. First, open the rear doors and begin to dismantle and remove the rear seat; then remove the plastic cover of the fuel pump, disconnecting the electrical connector of the float and the fuel line, as shown in the video.

At this point, remove the pump ring, taking it out of the tank; install the new low-pressure fuel pump, as well as the original one, making the connections.


Updated on 31 August 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To replace the fuel pump relay on a Volkswagen Golf 5, locate the box that contains all the relays. This is positioned behind a protective plastic co…
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this guide, we will see the instructions that will allow us to remove and replace the fuel pump relay on a Volkswagen Golf. First, open the driver…
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this tutorial, you will learn the main instructions for removing and replacing the fuel pump on a fifth-generation Volkswagen Golf with a 1.9 TDI …

Other guides you may be interested in

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos