|
Do it yourself
| |||
| ||||
How to replace the brake light bulbs on the Volkswagen Jetta
Model: Volkswagen Jetta
MK 6, A6
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
We can see in this video how to change the brake light bulbs on a non-hybrid Volkswagen Jetta (because they have LED bulbs): we are dealing with those that have normal incandescent bulbs. Inside the trunk, we find a small cover, with an arrow indicating the direction in which it slides, and from which we can access the optical group. We enter with our hand and find a wing nut that we can unscrew, and by pressing from behind we remove the entire rear light, being careful to disconnect the electrical plug we find behind it. At this point, we just have to remove the bulb holder to which the bulb we want to change is attached, and we will remove it with a quarter turn. We replace it with the new bulb (being careful not to touch it with bare hands) and then put everything back in place following the reverse instructions.
Posted on 10 January 2025 by ScegliAuto
Related tutorials
Volkswagen Jetta
(1998-2005 /
A4, MK 4)
In this tutorial, see how to replace the dipped beam bulbs in the Volkswagen Jetta, a very simple and quick operation. To do this, you will need a cr…
Volkswagen Jetta
(2005-2010 /
MK 5, A5)
Below are the main instructions useful for removing and replacing the rear brake light switch on the Volkswagen Jetta, as well as the Golf. First, op…
Volkswagen Jetta
(2018-2025 /
A7, MK 7)
In this tutorial, you will see how to remove the third brake light on the Volkswagen Jetta, a very simple and quick operation. First, ensure that the…
Other guides you may be interested in |
How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?
Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.017
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
