Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the timing belt of the Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Timing belt

See other generations:
Video tutorial

In order to replace the timing belt of the Volkswagen Polo, you need to open the hood so that you can access the components located inside the engine compartment: then you will also need to remove the front right wheel and the inner lining of the corresponding wheel arch.

Once these components have been removed, you can loosen the central nut of the belt tensioner pulley, remove it from its seat and thus release the tension of the belt.

The new belt can now be inserted to bring it back to tension and checking that everything works properly.


Posted on 21 January 2025 by ScegliAuto


Related tutorials

Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this guide, you will find the main instructions for removing and replacing the timing belt on the Volkswagen Polo 1.4 MPI; for this type of engine…
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) This guide outlines the main steps to remove and replace the timing belt on a Volkswagen Polo with a 1.4 petrol engine. First, lift the vehicle and r…
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) This guide provides the necessary instructions on how and when to replace the timing belt on a Volkswagen Polo 1.2 3-cylinder engine. For this type o…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - How much does it cost to replace the timing chain of the Volkswagen Polo 1.2 petrol? Read answer

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos