Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the central tunnel of the Volkswagen Tiguan?

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Center console tunnel

See other generations:
Video tutorial

In order to remove the central tunnel of the Volkswagen Tiguan, you first need to remove the gear knob and the leather covering that wraps around the lever; you can then proceed to detach the trim around the air conditioning controls. At this point, you will need to loosen all the screws that fix the central tunnel laterally, located along both sides.

By then unscrewing the screws at the base of the central armrest, it will be possible to detach the entire covering of the central tunnel, so that the new replacement piece can be inserted. After the replacement, you can verify that everything is functioning correctly.


Posted on 23 January 2025 by ScegliAuto


Related tutorials

How to Disable the Start&Stop System on the Volkswagen Tiguan?
How to Disable the Start&Stop System on the Volkswagen Tiguan?
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) To disable the Start&Stop system on the Volkswagen Tiguan, turn on the instrument cluster by inserting the key into the ignition and pressing the rel…
Resetting the Service light on the Volkswagen Tiguan
Resetting the Service light on the Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) When it is time to perform the service on the Volkswagen Tiguan, a warning message appears on the instrument panel. After completing all necessary op…
How to Replace the Handbrake Button on the Volkswagen Tiguan
How to Replace the Handbrake Button on the Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Today's instructions will show you how to remove and replace the handbrake button on the Volkswagen Tiguan. First, get inside the vehicle and remove …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos