Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the wheel of the Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Wheel

In the following guide addressed to all of you who own a Volkswagen Golf, we will discover together how to quickly and safely remove the wheel. First of all, make sure you have a 17mm key, a small hexagonal key, and preferably also a hammer. Turn off the car if it is still on and go outside. Position yourself in front of the wheel to be removed and use the hexagonal key to remove all the small rubber caps in the central area. Finally, use the 17mm key to unscrew the bolts holding the wheel in place and remove it completely.

Posted on 30 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace a Wheel with the Spare on a Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this video, see how to remove and replace the wheel with the spare due to a punctured tyre on the Volkswagen Golf seventh generation. First, remov…
Replacement of the rear wheel bearing of the Volkswagen Golf
Replacement of the rear wheel bearing of the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today's video tutorial will show us how to disassemble and replace the rear wheel bearing of the Volkswagen Golf. First, we lift the car and start by…
How to Install the Spare Wheel on the Volkswagen Golf
How to Install the Spare Wheel on the Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) This guide outlines the steps to install the spare wheel in case of a puncture on the Volkswagen Golf. First, open the boot lid and take out the spar…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos