Do it yourself
| ||||
|
Volkswagen Golf - Video tutorial
Model: Volkswagen Golf
MK 6, Golf 6, Golf VI, 5K1
- Years 2008-2012 Before we can start, we will have to sit in the driver's seat of our Volkswagen Golf. So let's start by unhooking the clips that secure the airbag, positioned on the rear side of the steering wheel. After that, we will have to go to disengage and extract the airbag from the steering wheel. By doing so, we will have released the airbag itself. We then proceed by disconnecting the relative electrical connector. When we have completed this last step, we will have successfully completed the disassembly of the steering wheel airbag of our Volkswagen Golf, and we will be able to proceed by installing the new airbag.
Posted on 11 February 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |