Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the alarm of the Volkswagen Transporter

Model: Volkswagen Crafter 2F, MK 1, 2E - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

Today we will see in an illustrative way how to permanently deactivate the alarm system of the Volkswagen Crafter, for example in case of malfunction. First, we get into the car and start by removing the entire light fixture on the ceiling; behind it is the alarm control unit, which we will remove (disconnecting all electrical connectors), as shown in the video.

At this point, the alarm system will be permanently deactivated, useful in case of sensor malfunctions; all that's left is to restore the alarm system's operation!


Posted on 1 February 2025 by ScegliAuto


Related tutorials

How to Reset the AdBlue Warning Light on the Volkswagen Crafter
How to Reset the AdBlue Warning Light on the Volkswagen Crafter
Volkswagen Crafter (2017-2026 / MK 2, SZ, SY) Below are the instructions that will allow you to reset the AdBlue refill warning light on the Volkswagen Crafter. After refilling the AdBlue liquid,…
Where is the OBD2 port of the Volkswagen Crafter 2 located?
Where is the OBD2 port of the Volkswagen Crafter 2 located?
Volkswagen Crafter (2017-2026 / MK 2, SZ, SY) If you own a second series Volkswagen Crafter and want to find out where the OBD2 port is located, you just need to carefully follow the following st…
Where to Find the Fuse Boxes on the Volkswagen Crafter and Caddy
Where to Find the Fuse Boxes on the Volkswagen Crafter and Caddy
Volkswagen Crafter (2006-2017 / 2F, MK 1, 2E) The fuse boxes on the Volkswagen Crafter (the same applies to the Volkswagen Caddy) are located as follows: the main one is under the driver's seat; …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos