Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light on the Volkswagen Crafter

Model: Volkswagen Crafter MK 2, SZ, SY - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: AdBlue warning light

See other generations:
Video tutorial

Below are the instructions that will allow you to reset the AdBlue refill warning light on the Volkswagen Crafter. After refilling the AdBlue liquid, it is necessary to manually deactivate the warning light if it does not reset automatically; to do this, a tool with the appropriate diagnostic software is required, thus resetting the AdBlue warning error, as shown in the video.

At this point, check that the AdBlue warning has indeed been reset on the small display of the instrument cluster by following the video tutorial to the end!


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to Reset the AdBlue Warning Light on the Volkswagen Crafter?
How to Reset the AdBlue Warning Light on the Volkswagen Crafter?
Volkswagen Crafter (2017-2026 / MK 2, SZ, SY) To reset the AdBlue warning light on the Volkswagen Crafter, you must first top up the necessary amount of additive liquid into the corresponding tan…
How to Top Up AdBlue in the Volkswagen Crafter
How to Top Up AdBlue in the Volkswagen Crafter
Volkswagen Crafter (2006-2017 / 2F, MK 1, 2E) AdBlue is used in many vehicles equipped with a Diesel engine, and its main function is to reduce pollution levels by decreasing harmful particles in…
How do you reset the Service light on the Volkswagen Crafter?
How do you reset the Service light on the Volkswagen Crafter?
Volkswagen Crafter (2006-2017 / 2F, MK 1, 2E) It will be possible to make the Service light disappear from the Volkswagen Crafter instrument panel by turning on the instrument panel, inserting th…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos