Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up AdBlue in the Volkswagen Crafter

Model: Volkswagen Crafter 2F, MK 1, 2E - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: AdBlue warning light

See other generations:
Video tutorial

AdBlue is used in many vehicles equipped with a Diesel engine, and its main function is to reduce pollution levels by decreasing harmful particles in the exhaust gases. As you can imagine, after driving many miles, it runs out, so it is necessary to top it up to maintain the integrity of the engine and the anti-pollution system.

Before you begin, ensure you have a container of AdBlue that is fully compatible with the Volkswagen Crafter. Next, with the engine off and sufficiently cool, lift the front bonnet and locate the tank with a blue cap on top. Unscrew the cap and pour in the new AdBlue. Once finished, screw the cap back on and close the bonnet.


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to Reset the AdBlue Warning Light on the Volkswagen Crafter
How to Reset the AdBlue Warning Light on the Volkswagen Crafter
Volkswagen Crafter (2017-2026 / MK 2, SZ, SY) Below are the instructions that will allow you to reset the AdBlue refill warning light on the Volkswagen Crafter. After refilling the AdBlue liquid,…
How to Reset the AdBlue Warning Light on the Volkswagen Crafter?
How to Reset the AdBlue Warning Light on the Volkswagen Crafter?
Volkswagen Crafter (2017-2026 / MK 2, SZ, SY) To reset the AdBlue warning light on the Volkswagen Crafter, you must first top up the necessary amount of additive liquid into the corresponding tan…
How do you reset the adblue warning light in the Volkswagen Crafter?
How do you reset the adblue warning light in the Volkswagen Crafter?
Volkswagen Crafter (2017-2026 / MK 2, SZ, SY) AdBlue is an anti-pollution additive used in vehicles with recently built diesel engines. This additive has its own tank and a reserve light, so when…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos