|
Do it yourself
| |||
| ||||
How to replace the handle and lock of the glove compartment of a Volkswagen Golf
Model: Volkswagen Golf
MK 6, Golf VI, Golf 6, 5K1
- Years 2008-2012
Let's see how to replace the glove box lock of a Volkswagen Golf. First, we need to remove the damaged lock: insert the key to retract the small piece of metal that we can see in the video, then cut a small piece of metal into small pieces, wedging them around the lock, pushing firmly out of the handle, while keeping the key inside: this is because all the small pieces of metal inside, otherwise, would fall out making the repair very difficult. Now take the new lock and insert our block, using the fixing screw to form a thread: screw it in and out several times. We will need another torx 15 screwdriver, no longer than 10 cm. Once the lock is in position, we will enter laterally with the screwdriver and tighten the fixing screw.
Posted on 18 February 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(1991-1997 /
Golf III, MK 3, Golf 3)
If the handle of the glove compartment on the Volkswagen Golf is broken, you may notice that the lock will not unlock, making it impossible to open: …
Volkswagen Golf
(2003-2008 /
MK 5, Golf 5, Golf V)
How to remove the door lock on a Volkswagen Golf Mk5? Follow these steps: use a lever or screwdriver to remove the plastic cover on the side of the d…
Volkswagen Golf
(2003-2008 /
MK 5, Golf 5, Golf V)
Remove the exterior handle with the lock located on the door of a Volkswagen Golf Mk5. Insert a suitable metal key into the slot on the door (side pa…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.347
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |