Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the AdBlue light on the Volkswagen Passat?

Model: Volkswagen Passat B8, 3G, MK 8 - Years 2014-2023
Part: AdBlue warning light

In order to completely reset the AdBlue warning light on the Volkswagen Passat, you will need to top up the appropriate amount of additional fluid: to do this, you will need to locate the specific tank. This tank will be located next to the fuel tank and can be accessed by opening the small door and unscrewing the blue cap: you can now pour in the necessary amount of additional fluid and then close the blue cap. You can then start the car and check that the warning light has disappeared.

Posted on 26 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the AdBlue Warning Light on the Volkswagen Passat 2.0 TDI
Resetting the AdBlue Warning Light on the Volkswagen Passat 2.0 TDI
Volkswagen Passat (2010-2014 / B7) Below are the steps to reset the AdBlue refill warning light on the Volkswagen Passat 2.0 TDI. First, get inside the vehicle and turn on the instrume…
How to reset the AdBlue warning light on the Volkswagen Passat?
How to reset the AdBlue warning light on the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) To reset the AdBlue warning light on the Volkswagen Passat, you need to top up by adding the necessary amount of additive liquid into the tank. This …
How to Reset the AdBlue Warning Light on a Volkswagen Passat?
How to Reset the AdBlue Warning Light on a Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) To reset the AdBlue warning light on a Volkswagen Passat, open the rear hatch of the car to access the interior of the boot. Here, you will need to r…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos