Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of a Toyota Corolla?

Model: Toyota Corolla MK 5, E210 - Years 2019-2026
Part: Body

Start by sitting in the driver's seat of your Toyota Corolla. Look under the dashboard on the left side of the driver: there you will find a bonnet release lever. Gently pull this lever. You may hear a small "click" when the mechanism releases. Now, exit the vehicle and head to the front of the bonnet. You will find another secondary release lever, towards the centre of the vehicle. Move this lever and lift the bonnet slightly to ensure it is fully released. Once sure, lift it completely and secure it with the bonnet prop, and you will have correctly opened the front bonnet of your Toyota Corolla.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to open the front hood of the Toyota Corolla
How to open the front hood of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Today we will explain how to open the front hood of the Toyota Corolla hybrid. To open the front hood, first we need to open the door on the left sid…
How to open the front hood of a Toyota Corolla
How to open the front hood of a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) To open the front hood of a Toyota Corolla model produced from 2003 to 2008, we must first get into the car and immediately lift the hood release lev…
How to Open the Bonnet on a Toyota Corolla?
How to Open the Bonnet on a Toyota Corolla?
Toyota Corolla (2013-2019 / MK 4, E170, E160) In this tutorial, see how to open the bonnet on a Toyota Corolla, a very simple operation that follows the standard procedure. First, enter the cabin…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos